Omron M4 Hem 722c1 E Manual 〈2024-2026〉

Stay still – repeat the measurement.

Avoid eating, drinking caffeine/alcohol, smoking, or exercising for 30 minutes before measuring. Rest in a quiet place for at least 5 minutes . Omron m4 hem 722c1 e manual

Let’s walk through the initial setup as outlined in the . Stay still – repeat the measurement

| Problem | Likely Cause | Solution from Manual Logic | |---------|--------------|----------------------------| | Display remains blank | Dead or incorrectly inserted batteries | Replace with new AA batteries; check polarity | | Readings seem too high or low | Cuff not at heart level | Reposition arm so middle of cuff aligns with your nipple line (mid-sternum) | | Unit inflates repeatedly | Air leak from cuff or connector | Check tube for cracks; ensure connector is firmly inserted into the monitor port | | Memory shows “0” readings | New batteries replaced or user ID changed | Take a new measurement; readings are not lost from other user | | Error E5 occurs | Cuff over-inflated beyond 300 mmHg | This is rare. Remove cuff, wait 5 minutes, restart. If persists, service needed | Let’s walk through the initial setup as outlined in the

To get the most out of this device, we recommend:

Before first use, set the correct date and time so your stored readings have accurate timestamps. This can also be done automatically by syncing the device with the OMRON connect app via Bluetooth. Preparing for Measurement To ensure accuracy, follow these pre-measurement steps: