: It can generate up to 52 reports covering various systems, including cardiovascular health, bone mineral density, trace elements, and organ functions. Operational Requirements
| Issue | Probable Cause | Solution | | :--- | :--- | :--- | | | Driver conflict. | Uninstall the driver in Device Manager, reboot PC, and reinstall using the specific driver folder from the CD. | | Software opens in Chinese | Language file reset. | Navigate to the installation folder C:\...\Quantum Resonance\ and delete the config.ini file. Restart the app; it may reset to default or allow you to select language. | | "Please Insert Key/Dongle" | Dongle not detected. | Remove the dongle, wait 5 seconds, and plug it into a different USB port. Wait for the drivers for the dongle to install. | | Test Values are abnormal | Poor contact or movement. | Ensure the hand is clean (no lotion). Ask the client to hold the sensor firmly but without squeezing. Retest. | | Error Code 003 | COM Port conflict. | Go to Device Manager > Ports (COM & LPT). Find the USB Serial Port. Right-click > Properties > Port Settings > Advanced. Change the COM Port Number to a lower number (e.g., COM2). | Quantum Resonance Magnetic Analyzer -4- 4.3.0 Setup
QRMA (Quantum Resonance Magnetic Analyzer) is claimed to be able to check the patient's bodily condition (including blood glucose) : It can generate up to 52 reports
Use the "Dossier" section in the toolbar to input basic tester information and begin a new record. Best Practices for Use | | Software opens in Chinese | Language file reset
| Do | Don’t | | :--- | :--- | | Store the probe in its anti-static sleeve. | Drop or bend the probe cable. | | Clean the gold tip with 70% isopropyl alcohol after each patient. | Use abrasive cleaners (they remove the gold plating). | | Perform a factory calibration monthly (Settings → Factory Reset → Calibrate). | Leave the analyzer plugged in 24/7 (the oscillator drifts). | | Keep a log of COM port assignments per USB port. | Connect to a USB hub (use direct motherboard ports). |
Setup Procedure for the Quantum Resonance Magnetic Analyzer – Version 4.3.0