User Manual Top - Empi 300pv

| Problem | Likely Cause | Manual's Solution | | :--- | :--- | :--- | | | Dead battery, loose wire, dry electrodes | Replace battery, push wire firmly, replace electrodes. | | Weak/Intermittent stimulation | Old electrodes (dried gel) | Replace electrodes every 10-15 uses. | | Sharp, stinging pain | Electrode edges curling, or skin not clean | Replace electrode, wash skin with mild soap. | | LCD flickers/unit shuts off | Low battery or faulty adaptor | Install fresh 9V battery. | | Error code "E-1" | Lead wire short circuit | Unplug, inspect for frayed wires, replace lead wires. | | Error code "E-2" | Output overload (intensity too high with broken skin contact) | Turn intensity to zero, check electrode adhesion. |

: Clinicians can lock up to three programs to ensure patient safety and compliance. To lock, select "Yes" at the final "Lock" prompt during setup. Compliance Data : To view usage history, hold while turning the device on. Unlocking Intensity : If the screen shows a lock symbol, press the DOWN arrow first to enable intensity adjustments. How to Use a TENS Unit empi 300pv user manual top

using the front-panel arrow buttons until you feel a strong but comfortable sensation. Advanced Programming Features The 300PV includes 13 preprogrammed regimens 4 customizable programs 300 PV | EMS/HVPG | Medi-Stim, Inc. | Problem | Likely Cause | Manual's Solution

Specialized for edema reduction and wound healing, typically delivered through Channel 1. Operating Instructions for Users | | LCD flickers/unit shuts off | Low

Clinicians can control patient access and monitor progress through the following advanced features: