Ld-c101 Usb To Ci-v Driver Jun 2026

Physically, the LD-C101 is generally packaged as a compact dongle or a small internal PCB (Printed Circuit Board). It features a USB Type-A or Type-B connector on the computer side and a 3.5mm stereo jack or a dedicated header on the radio side. The design is powered entirely by the USB bus, drawing approximately 5 volts from the host computer, which eliminates the need for external power supplies. Its compact form factor makes it highly portable, a critical feature for field operations and portable stations.

You install the driver. Windows recognizes “USB Serial Port (COM5).” You open your logging software, select COM5, set the baud rate to 19,200 (or 9,600, or 57,600 depending on the radio’s mood). You click “Test.” Silence. No frequency readout. No response. The red TX light on the LD-C101 flickers once in mockery, then goes dark. Ld-c101 Usb To Ci-v Driver

: Often found in "premium" or older versions. It appears as "USB Serial Port" or requires the "FTDI VCP" driver. 2. Driver Download & Installation Physically, the LD-C101 is generally packaged as a

The is a specialized USB-to-CI-V control cable designed specifically for Icom amateur radios . It acts as a bridge, allowing your computer to communicate with the radio for frequency control, logging, and remote management through popular ham radio software. Technical Specifications Its compact form factor makes it highly portable,

Each Icom radio has a unique CI-V address (default is often 0x5E for IC-706, 0x88 for IC-7300). You must set your software to match the radio. If unsure, read your radio’s manual or set the radio to "ALL" or "00" for broadcasting.

For your computer to "talk" to the radio, the LD-C101 driver creates a .