Xinje Plc Usb Driver Install

There are two ways to install the driver, depending on how Xinje packaged the software version you are using.

XINJE’s USB protocol is proprietary. Do not attempt to use generic Modbus USB drivers—you will lose programming functionality. xinje plc usb driver install

Here’s a concise review of the process, based on common user experiences (for models like XC, XD, XL series). There are two ways to install the driver,

If you are using a conversion cable (like the USB-XC), you may need standard serial drivers (such as CH340 or Prolific), which are often included with the cable or the PLC software installation. Step 2: Manual Installation via Device Manager Here’s a concise review of the process, based

| Problem | Likely Cause | Solution | |---------|--------------|----------| | Unknown device in Device Manager | Driver not installed or wrong driver | Reinstall CP210x driver. Disable signature enforcement. | | Driver installs but software cannot connect | Wrong COM port selected | Check COM port number in Device Manager. Change in software. | | Error: "Cannot open COM port" | Port in use by another application | Close any other software (e.g., Modbus scanners). Restart PC. | | PLC not detected after cable change | Faulty USB cable or port | Try a different USB cable (must be data-capable, not charge-only). | | Driver install fails with error code 10 | USB controller issue | Uninstall device from Device Manager, unplug PLC, restart, then reconnect. |