Gemel Txshs User Manual File

To trigger the alarm manually, press and hold Button 1 for several seconds. Removing the Motion Sensor:

(such as the DWA 6). Below is an informative guide on how to operate and synchronize this transmitter, based on common manufacturer procedures and user documentation. Remote Control Buttons The TXSHS transmitter typically features two buttons: Button 1 (Knurled/Left): Generally used to the alarm and deactivate specific sensors. Button 2 (Smooth/Right): Generally used to deactivate the alarm. Basic Operation Activating the Alarm: Gemel Txshs User Manual

Release both buttons, then press either Button 1 or 2 once. The remote LED should switch off. To trigger the alarm manually, press and hold

If your remote has stopped responding—often after a battery change (CR-2032)—you may need to re-sync it with the motorcycle. Follow this procedure from Cutting Edge Automotive Solutions : Turn your key to the "On" position. The remote LED should switch off

On newer BMW models (like the R1200/1250 GS), you can manage the alarm through the onboard : Navigate to Settings > Vehicle Settings > Alarm System .