Offers millisecond programming for pinpoint accuracy in lubricant delivery.
The Castrol Lubecon Advanced System Controller is a high-performance, four-channel, programmable unit designed to automate industrial conveyor lubrication, ensuring precise oil application to reduce waste and prevent equipment failure. It features password-protected settings, memory backup, and real-time monitoring to enhance operational efficiency. Detailed installation and maintenance, including proper mounting and initial system purging, are critical for optimal performance. Learn more about the controller's features and download the manual via LubeCon USA . Automated Conveyor Oil Controllers - LubeCon USA castrol lubecon advanced system controller manual
She checked the archived configuration dump from the dead pump station. The last operator text input, entered 114 days before the plant went silent, was: The last operator text input, entered 114 days
If you need the original PDF or printed documentation, do not rely on third-party sketchy sites. Castrol Industrial maintains a strict IP protection policy. Here is the official hierarchy for retrieval: The last operator text input
| Code | Display Message | Meaning | Manual Solution | | :--- | :--- | :--- | :--- | | | Press Low | Pump ran full t-on but never reached low pressure switch. | Refill reservoir. Check for air lock in suction line. Prime the pump via the TEST button. | | E-02 | Press High | Pressure exceeded P-05 limit in under 2 seconds. | Frozen injector or blocked line. Manually crack a fitting near the controller to relieve pressure. | | E-04 | Level Low | Low level sensor in reservoir is dry. | Refill with Castrol specified grease only. Mixing incompatible thickeners (lithium vs. calcium) causes E-07 later. | | E-07 | Cycle Fail | Controller sent "Go" signal but no injector cycled. | Check the main solenoid valve coil for resistance (ohm meter: 50-200 ohms). Replace coil. | | E-12 | Motor Overload | Thermal relay tripped. | Pump motor seized. Wait 20 min for reset. If recurring, replace pump head. |
Explains how to set channels based on machine-run time or input counts (steady or pulsed outputs).